Michael Bublé has returned to his fans for 91 shows in North America and Europe, relying on a Meyer Sound system supplied by Montreal-based Solotech.
Although the core LEO Family loudspeaker components are similar to those used since Bublé’s 2013 outing, for this tour the configuration has been altered to remedy monitoring issues and provide a more intuitive experience for the audience. This “dual hybrid” audio configuration complements and enhances the production’s split staging: a large end stage accommodating a full orchestra and background singers (up to 38 in total); and a smaller B-stage centered in the arena and connected to the main stage by a catwalk.
The main stage audio system, which anchors the orchestra image and covers the bowl seating up to about halfway back into the arena, comprises typical side and main arrays, but with the main front arrays canted off to the side, as they are not directed for vocal coverage of the rear portion of the arena. That job is handled by a separate multi-array system flown under the scoreboard, with the two most powerful arrays covering the rear seating bowl by functioning essentially as a massive delay cluster whenever Bublé is performing on the main stage.
When Bublé walks out to the central B-stage, the “zero point” of his voice follows along, transitioning in sync so that, when he arrives, his voice is securely anchored directly overhead while the orchestra image remains at the main stage.
As explained by Craig Doubet, Bublé’s FOH engineer since 2007, the original impetus for this setup came from Bublé himself. “Michael loves getting out into the audience on a B-stage, which he has done the last two tours, but he was having a problem with his vocal from the main stage PA bleeding into his mic and then going into his IEMs.”
When preparing for the tour, Doubet sat down with Meyer Sound director of system optimisation, Bob McCarthy, senior technical support specialist, David Vincent, and digital systems product manager, Rob Mele, to sketch out possible solutions. The particulars were later engineered in collaboration with the tour’s system engineer/crew chief, Jonathan Trudeau, and Solotech Audio projects manager, Patrice Lavoie.
“The upshot is that now Michael is never directly in front of a loudspeaker,” said Doubet. “When he goes to the B-stage, we move his vocal along using some newly developed software in GALAXY. What’s more, in a segment of the show where a small band joins him at the B-stage to evoke his days playing clubs, the main stage system is turned completely off and we bring up a pair of back-facing LEOPARD arrays to create a self-standing, in-the-round arena system. Michael is now very happy. We’ve made him feel like he’s always singing at the zero point.”
The main stage system for the tour comprises a total of 16 LEO and 44 LYON line array loudspeakers configured across the front/out and side systems. 12 1100-LFC low frequency control elements are flown at the main stage, with front fill from eight MINA and two JM-1P loudspeakers and floor bass anchored by four 900-LFC elements.
The B-stage system comprises two long-throw arrays each with five LEO-M and six MICA line array loudspeakers; side arrays of 14 each MICA loudspeakers; and stage-facing rear arrays of eight-each LEOPARD line array loudspeakers. Flown subwoofers are 12 700-HP, with two 900-LFC elements on the floor along with seven MINA loudspeakers for front fill. System drive and optimisation is supplied by a Galileo GALAXY 816 AES master processor networked via AVB with seven GALAXY 816 array processors.
Doubet added: “I grew up in this business with the MSL-5 and 6, which were for me the epitome of a vocal box. LEO sounds like that to me, except it has more power and versatility.”
'An Evening with Michael Bublé' launched on February 13 and toured North America through April 19. From May 20 through November 10 the tour will alternate between Europe and North America, with additional dates around the globe through next summer to be announced soon.