Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×

APOLLO 11 play creates immersive experience with KV2 Audio and TiMax

APOLLO 11, which tells the story of the 400,000 people that worked to accomplish the moon landing, is staged in a purpose-built venue, The Lunar Dome, with 40,000 square feet of 360-degree video projection, a life-sized rocket and a KV2 Audio sound system designed by sound designer, Bobby Aitken

Photos by Jim Cox

As the world celebrates the 50th anniversary of the moon landing in 1969, the new play – APOLLO 11 – has endeavoured to recreate this historic event with an immersive theatrical experience, utilising a KV2 Audio sound system and TiMax tracking system.

APOLLO 11 tells the story of the 400,000 men and women who worked to accomplish the moon landing. Told through the eyes of a retired NASA aerospace engineer as he recounts the story to his teenaged granddaughter, APOLLO 11 is staged in a purpose-built venue, The Lunar Dome, that plays host to 20 actors with 40,000 square feet of 360-degree video projection, a life-sized rocket and a KV2 Audio sound system designed by Broadway and West End theatre sound designer, Bobby Aitken, and supplied by Stage Sound Services in Cardiff.

The first run has just finished in Pasadena, California, with the next shows scheduled in Houston, Texas in December.

“This was a very interesting production to work on as it shifts in scale enormously from what is a fairly domestic drama, where the sound is simply the spoken voice, to these massive moments of immersive, 360-degree interstellar projection where all of a sudden the sound is everywhere and all-enveloping,” recalled Aitken. “I was charged with the System Design and Sound Design and I worked with Fergus O’Hare on the content.”

The TiMax spatial reinforcement and tracking system was a key part of Aitken’s design and required a lot of work in the programming stage. “Everything came through the console and straight out from the faders into TiMax,” explained Aitken. “That gave us 64 outputs for around 80 loudspeakers in total, meaning that a very high percentage of the speakers were independently addressable. That gave us a lot of scope to move sound around the room. Also, all the actors were wearing trackers, which enabled us to sort out levels and delay times on an actor-per-actor basis. One of the inherent issues of working in the round is that the cast member speaking inevitably has their back to someone, so there’s a lot of correction to do.”

Aitken also pointed out that hanging loudspeakers was far from straightforward on this production. “One of the drawbacks of having such a huge amount of projection is that wherever you want to fly a loudspeaker, you’re inevitably cutting through a projection cone. We all had to make compromises, but fortunately, the projection department has many clever ways of mapping their way around obstacles.”

And what of the loudspeaker system itself? “I love the sound of KV2 loudspeakers,” declared Aitken. “There’s nothing they produce that I don’t like, so it was an easy choice for me. I made the decision about four years ago that actually, point source systems in many venues make a lot of sense, and I needed to go back to using point source equipment as much as possible. If I’m using point source, then I’ll try to use KV2 because they sound great, and frankly, they represent excellent value.”

For the vocal system, Aitken specified a drop of eight EX26 active speaker systems around the 280-degree playing circle and 20 EX6s cut into the floor to cover the first three rows before the overhead speakers come into play. “Each of these speakers was individually addressable via the TiMax system to enable the actors to be tracked, as the geometry of the space is pretty complicated, and that worked super well.” A further 20 EX26s were flown behind the last row as a surround sound system which Aitken used for effects, reverb and a bit of music reverb as well.

The main music system was situated upstage on a walkway above a pair of huge gantry doors that formed part of the set. Aitken chose five wide dispersion, full range ESR212s – the outer pair mounted horizontally due to the architecture of the set, whilst the middle three were mounted vertically. “We didn’t have room for the bigger ESR215s which would have been my first choice, but the 212s worked really well.

“We used four EX10s to really localise the sound to the lander, but we also had four of KV2’s VHD4.21 subs spaced at intervals under the seating up to about 3m off the ground. I’ve never used them before, but they are just ridiculous – the size of a small car. We didn’t use them that much, but when we did, you knew about it – they moved the whole place!”

Aitken concluded: “We had a really tight get-in on-site, so really, the only way to guarantee that it would go smoothly was to do a technical build to prove the concept first. As all of the creative team and the equipment came from the UK, we did the technical build at Pinewood Studios. Once it had been fully tested, we shipped it to California and then re-built everything at the Rose Bowl in Pasadena. From a technical perspective, this is an amazing show, and I’m delighted to say that it sounded absolutely fantastic. In fact, it sounded a lot better than it should have done given the constraints that were imposed upon us. So yes, I’m pleased, and yes, it’s another great show with KV2.”

 

Close