Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×

Dynacord adds to Vertical Array line

Dynacord is expanding its Vertical Array loudspeaker family to include two new full-range boxes – the TS 100 and TS 200 – launched at InfoComm MEA in Dubai.

Dynacord is expanding its Vertical Array loudspeaker family to include two new full-range boxes – the TS 100 and TS 200 – launched at InfoComm MEA in Dubai. The TS 100 features power handling of 150W/RMS and is designed for a multitude of applications including installations, AV applications or for supplying front fill in the theater. Its 16 ohms of impedance makes the operation of up to eight TS 100 units by a single power amplifier channel possible. For the low-frequency range and midrange, a low-distortion DND 6130-16 neodymium chassis is employed, the high-frequency range being covered by a Constant Directivity HPT94 HF horn that can be rotated through 90 degrees for horizontal applications. The TS 200 (pictured above) features power handling of 300W/RMS. Its high sound pressure and controlled dispersion make it ideal in mobile use as a medium-sized FOH system with passive or active subwoofers, full range, fill or delay in larger systems as well as in the field of fixed installation. For the low-frequency range and midrange, two low-distortion DND 6130-16 neodymium chassis in a vertical-array configuration are used, whilst the high-frequency range is also served by an Electro-Voice DH3 driver in a Constant Directivity HPT94 HF horn. The integrated crossover is phase optimised and provides all the loudspeakers with electronic protection against thermal overload. www.dynacord.com

Close